K Cleaning Around The Ionizers And The Sensors For Automatic Print Adjustment - Oki IP-5630 User Manual

K Cleaning around the ionizers and the sensors for automatic print adjustment

Ink may adhere to the area around the ionizers and to the sensors for automatic print adjustment due to the effect
of the ions generated by the ionizers. Periodic cleaning is required because this may cause a loss of precision of
the automatic print adjustment function and ink particles to fall onto the printout. The amount of ink that adheres
to these areas varies depending on the print data and the ionizer usage, but it is recommended to clean the area
approximately once per year.
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2 START MAINTENANCE
3
MAINTENANCE
2
PH MAINTENANCE
4
>PH MAINTENANCE
2
SET PH FOR CHECK
5
>>SET PH FOR CHECK
OK?
6
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
,
Press the MAINTENANCE button.
Press the Down button to select PH
MAINTENANCE.
Press the OK button.
Press the Down button to select SET PH FOR
CHECK, and then press the OK button.
Press the OK button.
The carriage moves to the maintenance area.
The printer issues a warning beep.
š When the carriage moves, the printer issues a
warning beep.
To disable the warning beep, see the page 187.
131
Maintenance