Move the print start position
Move the print start position (origin), to start printing on your preferred position.
After printing, rewind the roll, and with this function you can print an image in the blank area.
CAUTION
Complete this operation as quickly as possible. Otherwise the print heads may dry, which may cause ink ejection failure. In
such a case perform a cleaning.
1
BACKFEEDING MEDIA...
2
PRINTER READY
01: PAPER / 1626mm
3
START ORIGIN SETTING
OK?
4
ORIGIN SETTING
CARRIAGE IS MOVING
Carriage stops moving.
5
SET ORIGIN
OK?
,
Rewind the media.
See Feed or rewind media on
CAUTION
Rewind the media after the printout has completely
dried. If the media is rewound while the printout is not
sufficiently dry, the printout may be damaged.
Press the Left button.
Press the OK button.
The carriage moves and the origin setting function is
activated.
Move the carriage with the Left or Right
button to the position to be set as the origin.
Align the
s
mark at the bottom left of the carriage cover's
front panel with the origin of the next printout.
origin
Advanced operations
page 178.
179