Table of Contents
Advertisement
About the unwinding direction
š The unwinding direction depends on the take-up direction switch setting.
You must set the switch to a different position if the media has been taken up in the inner or the outer take-up
direction. Refer to the figure below when setting the switch.
About the duration of the unwinding operation
š The unwinding operation stops automatically after a certain length of time. To continue unwinding the media,
return temporarily the take-up direction switch to the off position, and then set it again to the adequate unwinding
direction.
Take-up switch
When the media has been
taken-up in the inner
direction
When the media has been
taken-up in the outer
direction
Stop
Loading the media
69
Advertisement
Table of Contents
