E Wiper Blade Cleanliness Check And Replacement; Wiper Blades Check - Oki IP-5630 User Manual

E Wiper blade cleanliness check and replacement

Wiper blades check

Check that the wiper blades are not damaged or dirty during the daily inspection.
If one of the wiper blades is as shown below, replace it following the F Wiper blade cleanliness check and
replacement procedure on
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2 START MAINTENANCE
3
MAINTENANCE
2 WIPER MAINTENANCE
4
>WIPER MAINTENANCE
2
WIPER BLADE CHECK
5
>>WIPER BLADE CHECK
OK?
6
WIPER IS MOVING...
PLEASE WAIT
106
Maintenance
page 106.
, ,
The part stops moving.
Press the MAINTENANCE button.
Press the Down button to select WIPER
MAINTENANCE.
Press the OK button.
Press the Up and Down buttons to select
WIPER BLADE CHECK, and then press the OK
button.
Press the OK button to start the operation.
To cancel the operation, press the CANCEL button.