Take-Up Switch Setting; Using A 2 Inch Core - Oki IP-5630 User Manual

Take-up switch setting

For the take-up direction, the outer take-up (print side out) or inner take-up (print side in) can be selected.
When take-up is not used, set the take-up switch to OFF.
Set the switch to the proper mode based of the figure below.

Using a 2 inch core

With this unit, by removing the 3inch adapter, a 2inch paper tube can be used. To remove the3 inch adapter, the
supplied attachment is needed. The removal procedure of the3inch adapter is explained below.
1
2
60
Loading the media
Take-up switch
Attachment
3 inch adapter
Winding
OFF
Outer
take-up
Inner
take-up
Insert the attachment in the hole in the
center of 3 inch adapter.
Turn counterclockwise (
direction) the 3 inch adapter and pull it out
together with the attachment.
3 inch adapter
in the arrow
Attachment