Table of Contents
Advertisement
Power supply
1. Install the printer near the socket. To be able to pull out the power plug in an emergency, the power
socket must be reached easily.
2. Do not share the power supply with noise generating devices such as a motor.
3. Use the power supply voltage specified on the nameplate.
4. Monthly turn off the printer and check the following:
-
The power plug is securely inserted into the socket.
-
No dust is accumulated between the plug terminals and the socket. When dust is found, clean the area
with a dry cloth.
Printer
1. Do not place anything on the top of the printer. Do not rest your elbows on the printer.
2. Do not apply shock or stress to the printer.
3. During the print operation, do not open the front cover, nor set the pressure roller lever to the open (top)
position. Otherwise the printer operation will end.
4. Do not clean the cover's surface with benzene or paint thinner. This may damage the printer's paint. Clean
the cover's smear with a soft cloth. If the cover is considerably smeared, wipe it off with a cloth moistened
with water-diluted neutral detergent. If it is not cleaned, the printer's surface paint may be damaged.
5. Always use the OKI Data specified attachments and options. The other products may degrade the image
quality, damage the printer, and make maintenance impossible.
Regular inspection and maintenance
Due to solvent ink characteristics, inspection and maintenance need to be performed periodically. (For
details on maintenance, see the Maintenance section starting on
1. Perform the start maintenance every day before starting using the printer.
2. Pay particularly attention to the items below.
- Supply wiper cleaning liquid when the bottle is empty.
- Print heads are highly-precise parts. Do not wipe the nozzle surface directly.
3. If you stop using the printer for more than 2 weeks, perform the service cleaning.
4. If, after the service cleaning, you have left the printer for a long time and you start printing with the
printer again, be sure to perform the head cleaning operation and to prime the ink system.
5. The printer performs periodically automatic maintenance operations. Keep the printer always to allow it
to perform these maintenance operations.
Consumables
1. OKI Data ink cartridges should be installed before the Install By date printed on the pack. Other non-
genuine ink cartridges may damage the printer. In this case, printer repair fees will borne by you.
2. To guarantee print quality, expiration dates are indicated for ink cartridges, cleaning liquid cartridge sets,
and storage liquid cartridge sets. Use these consumables before their expiration date.
3. Put used ink cartridges into a plastic bag and dispose of them as industrial waste. Observe local
regulations for disposal of consumables.
4. Unpack the OKI Data ink cartridges only to install them. Do not store OKI Data ink cartridges in direct
sunlight. Store the OKI Data ink cartridges in a cool, dry place. This prevents deterioration of the ink during
storage.
5. Do not disassemble the ink cartridges. They are intended for single use only.
6. Do not drop the ink cartridges. Avoid shock to them. The drop or shock may cause an ink leakage.
16
page 89.)
Advertisement
Table of Contents
