Notes
The recommended modes are STANDARD to print in normal density and HIGH QUALITY / HIGH DENSITY to print in high
density.
Use the other modes according to your needs for productivity and quality.
Printing in HIGH DENSITY uses large quantity of ink. Sometimes it may cause the ink to blur, ink drying problems, or take-
up problems.
In such cases, reduce the printing speed.
Set the carriage speed
You can set the carriage to NORMAL or SLOW.
Normally, set the speed to NORMAL. Select SLOW to obtain a better resolution and a more precise print.
(The carriage speed cannot be changed from the RIP software. Use panel operations or CP_Manager)
1
PRINTER READY
01: PAPER / 1626mm
2
MENU
2
INFORMATION
3
MENU
2
EDIT MEDIA PRESETS
4
>EDIT MEDIA PRESETS
2
SELECT PRESET NO.
5
>EDIT MEDIA PRESETS
2
MISC SETTINGS
6
>>MISC SETTINGS
2
REMAINING MEDIA
7
>>MISC SETTINGS
2
CARRIAGE SPEED
Press the MENU button.
Press the Down button to select EDIT MEDIA
PRESETS.
Press the OK button.
Press the Down button to select MISC
SETTINGS.
Press the OK button.
Press the Down button to select CARRIAGE
SPEED.
Press the OK button.
Advanced operations
191