Table of Contents
Advertisement
23
SET MEDIA RIGHT EDGE
OK?
24
MOVE CARR. TO MEDIA
L EDGE WITH R/L KEY
25
MOVE CARR. TO MEDIA
L EDGE WITH R/L KEY
26
SET MEDIA LEFT EDGE
OK?
27
CHECKING MD EDGES
PLEASE WAIT
PRINTER READY
07: TRANSPARENT/1626mm
Notes
‹ DETECT MEDIA and DETECT MEDIA WIDTH settings change with the media preset.
When using transparent media or media with black reserve side, it is recommended to use a media preset dedicated
to these types of media.
‹ If you use only one media preset and transparent media and media with black reverse side, change the DETECT
MEDIA and DETECT MEDIA WIDTH settings to use these types of media, and then return the settings to their
previous values when using conventional media.
52
Loading the media
,
Press the OK button to set the media right
edge position.
Press the Left or Right button to move the
carriage to the left edge of the media.
Align the s mark at the bottom left on the
front of the carriage cover with the media left
edge.
Move the carriage so that this mark is aligned
with the left edge of the media.
Press the OK button when the carriage is
aligned with the media left edge.
Press the OK button to set the media left
edge position.
The carriage returns to its previous position and the printer
is ready to print (online state).
Advertisement
Table of Contents
