The media has skewed.
When the media skew check setting is on, the printer checks for skewed media after printing a certain length of
media. If the media has skewed more than a defined distance, the print pauses and a screen where you can select to
continue or stop the print is displayed.
PRINTING...
STANDARD ND BI
The printer checks for skewed media.
MEDIA SKEW. CONTINUE
PRINT? OK/CANCEL
Continue printing with the OK button.
PRINTING...
STANDARD ND BI
CANCEL is recommended.
If you select [OK] to continue the print, the rest of the suspended printing job is started. However, the media may be
disengaged from the media edge guards, or the printer may be jammed with media. When the printout is lengthy,
the skew may worsen, which may damage the printer.
Skewed media was detected.
- The ONLINE LED flashes slowly.
Stop printing with the Cancel button.
LIFT THE LEVER
ALIGN THE MEDIA
223
Troubleshooting