Edge Sensors Cleaning - Oki ColorPainter M-64S User Manual

Edge sensors cleaning

The precision of the automatic media identification function will decrease if ink mist adheres to the edge sensors.
Therefore, it is necessary to clean the sensors periodically. The quantity of ink mist that will adhere to the sensors
depends on the print data and the printer usage conditions.
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2
START MAINTENANCE
3
MAINTENANCE
2
PH MAINTENANCE
4
>PH MAINTENANCE
2 SET PH FOR CHECK
5
>>SET PH FOR CHECK
OK?
6
CARRIAGE IS MOVING
PLEASE WAIT
7
OPEN COVERS AND
CHECK PRINT HEADS
64
Maintenance
,
Carriage stops moving.
Press the MAINTENANCE button.
Press the Down button to select PH
MAINTENANCE.
Press the OK button.
Press the Down button to select SET PH FOR
CHECK, and then press the OK button.
Press the OK button.
The carriage moves to the maintenance area.
The printer issues a warning beep.
š When the carriage moves, the printer issues a
warning beep.
š To turn the warning beep off, refer to Turn the
warning beep off on
Color Inkjet Printer User's Guide.
Open the front cover, and then the
maintenance area cover.
page 200 in the IP-6620