Siemens SIMATIC ET 200SP Operating Instructions Manual page 47

Input
[inProcessValueReal1 to inProcessValueR‐
eal4]
[inProcessValueDWord1 to inProcessValueD‐
Word4]
[scaleStatus]
Output
[ioProcessValue5 to ioProcessValue8]
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA
Parameter assignment/addressing
6.2 TIA Portal user program
I/O process values in Real format according to de‐
fined parameters in DR07 (Page 72).
I/O process values in DWord format according to de‐
fined parameters in DR07 (Page 72).
Weighing status of weighing steps according to pa‐
rameters in DR30 (Page 103).
I/O process value according to defined parameters
in DR07 (Page 72).
47