Siemens SIMATIC ET 200SP Operating Instructions Manual page 39

5. In the left-hand tree, navigate to TM SIWAREX WP351 HF.
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA
Web server
HTTPS
Logon name / Access right /
Password
IP address
Subnet mask
Set IP address in the project
Permit adapting the IP ad‐
dress directly at the device
Use router
Router address
Device name
Activate the access for the Web server.
Function is not supported with FW version 1.0.0.
Create up to five different users.
Assign the "Read" or "Read and write" permission individually to
each user.
Read means that the user has read-only access to the Web server
and can create and download a backup of the current configuration.
The user cannot change data or start commands.
Invalid combination of logon name and password
The following combination is intended exclusively for emergency
access to the Web server.
Logon name: admin
Password: admin
For more on this, see section: AUTOHOTSPOT > Procedure in
case of loss of user data.
IP address of the electronic weighing system
(default: 192.168.0.21)
Subnet mask of the electronic weighing system
(default: 255.255.255.0)
The IP address of the electronic weighing system is transmitted via
the hardware configuration during CPU startup.
The IP address is only specified via TIA Portal.
The IP address of the electronic weighing system is not assigned
via the TIA Portal.
● Assign the IP address via an external tool (e.g. PST Tool)
Defines whether or not a router is used.
IP address of the router
Network name of the electronic weighing system
Parameter assignment/addressing
6.2 TIA Portal user program
39