Table of Contents
Advertisement
7.1.2 Verification conditions
You can set a verification starting position and the number of characters to check.
- Starting position:
- Number of characters: The choices are 1 through 7 and everything following the starting position (up to a
For example, you can specify all characters or particular characters of bar code data to check as shown below.
Master data
12345601
Bar code data readable
12345601
Master data
12345601
Bar code data readable
01347803
Note: If the bar code type (symbology) of data read is different from that of the master data, the verification results
in a mismatch even if those data matches.
The choices are 1st through 7th characters.
maximum of 32 characters).
Verification conditions: All characters to check
To check all characters as underlined at left, for example, set the following:
- Starting position:
- Number of characters: All characters
Max. 32 bytes of bar code data can be verified.
Verification conditions: Particular characters to check
To check particular characters as underlined at left, for example, set the
following:
- Starting position:
- Number of characters: 2 characters
1st character
3rd character
16
Advertisement
Table of Contents
