Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
6 Remove the switch bank assembly from the component sled.
• Remove the three screws that attach the switch bank assembly to the component sled.
• Pull the switch bank assembly straight out of the component sled.
Removing/replacing the switch bank assembly
F
36:
IGURE
N
:
Guide the cables as you remove the assembly from the component sled. Be careful not
OTE
to damage the EMI gasket around the opening in the component sled.
7 If you are removing the switch bank assembly to replace it with a new assembly, remove the
DVD drive (see
page
101).
Component sled
Screw (1 of 3)
Switch bank assembly
98
Advertisement
Table of Contents
