Omron SmartSlice GRT1 Series Operation Manual page 93

Status Areas
Alarm Status Area
GRT1-DA2@
Warning Status Area
74
Bit Contents
9 Cumulative Counter Flag
OFF: Within range (below
monitoring set value)
ON: Out of range (at or above
monitoring set value)
10 Reserved.
11 Reserved.
12 Reserved.
13 Reserved.
14 Reserved.
15 Reserved.
The Analog Input Unit Alarm Status Area is configured of the following 16 bits.
It provides notification of minor errors in the Analog Input Unit.
Bit Contents
0 Reserved.
1 EEPROM data error
2 Reserved.
3 Reserved.
4 Reserved.
5 Reserved.
6 Reserved.
7 Reserved.
8 Off-wire Detection Flag
9 Analog hardware error
10 Reserved.
11 Reserved.
12 Reserved.
13 Reserved.
14 Reserved.
15 Reserved.
The Analog Output Unit Warning Status Area is configured of the following 16
bits. It provides notification of serious errors in the Analog Output Unit.
Bit Contents
0 Reserved.
1 Reserved.
2 Reserved.
3 Unit Maintenance Flag
OFF: Normal; ON: Error (over
threshold)
4 Reserved.
5 Reserved.
6 Reserved.
7 Reserved.
8 Error Output Flag
OFF: Normal; ON: Error being
output
Section 5-2
Description
Turns ON when the cumulative value
exceeds the monitoring set value.
---
---
---
---
---
---
Description
---
OFF: Normal; ON: Error
---
---
---
---
---
---
OFF: Normal; ON: Disconnection
OFF: Normal; ON: Error in analog hard-
ware
---
---
---
---
---
---
Description
---
---
---
Monitors the power-ON time set as the
threshold for the Unit conduction time
monitoring function.
---
---
---
---
ON while error is being output.