Omron SmartSlice GRT1 Series Operation Manual page 119

Analog Input Units
Hysteresis Setting
100
4. Select the tab page for the input where top/valley hold is to be set, and se-
lect the Top/Valley Hold Check Option in the Function Choice Area.
5. To allocate the Hold Flag (output) in the default connection path, click the
General Tab, and select Holding Value from the pull-down menu in the
Default Connection Path (Out) Field.
6. Click the Download Button, and then click the Reset Button to reset the
Unit.
7. Click the OK Button to exit.
The hysteresis value can be set using the Setting Tool to prevent detection of
top or valley values that occur due to minor fluctuations in the analog input
Section 5-4