Omron SmartSlice GRT1 Series Operation Manual page 192

GRT1-CP1-L Positioning Unit
Setting Positioning
Functions
Help
General Tab Page
3. Set the items in the dialog box as shown in the following table.
Item
I/O Comment
Detection Mode
Value
The above settings are stored in non-volatile memory. If the setting is
changed, the Positioning Unit must be reset before the new setting will be
valid.
A Positioning Unit supports one counter input.
Click the Positioning Tab in the Edit Unit Parameters Window to display the
Positioning Tab Page shown below.
The Positioning Tab Page contains up to four tab pages used to set various
counter functionality. The Range 0 and Range 1 Tab Pages appear only when
the Range 0 and Range 1 check boxes are selected.
Help is provided at the bottom of each tab page inside the Positioning Tab
Page, along with the default setting and setting limits.
The General Tab Page is used to set operating parameters, as described
below.
These settings are stored in non-volatile memory. If a setting is changed, the
Positioning Unit must be reset before the new setting will be valid.
■ Configuration Tag
The configuration tag indicates the version of all the present counter parame-
ter settings. The configuration tag can be used to manage the parameter set-
tings as a group.
Description
Enter a comment for the digital input.
Specify whether to keep track of the total ON time (unit: s) or
number of contact operations (unit: operations) for the mainte-
nance counter of the digital input.
Enter the set value for the detection mode.
The value can be set to between 0 and 4,294,967,295 opera-
tions for the number of contact operations and to between 0
and 4,294,967,295 seconds for the total ON time.
Section 6-5
173