Omron SmartSlice GRT1 Series Operation Manual page 40

Functions Shared by all Units
Setting with a
Programming Device
1,2,3...
This example shows how to use the DeviceNet Configurator (version 2.43 or
higher) to set the device comments.
1. Open the Network Configuration Window and double-click the desired
Slice I/O Terminal's icon or right-click the icon and select Parameters -
Edit to display the Edit Device Parameters Window.
2. Select the desired Slice I/O Unit from the list in the I/O Module Tab and
click the Edit Button.
3. Select the IN Tab or OUT Tab. (In this case, the IN Tab has been selected.)
4. Select the connected device that requires a comment and double-click the
I/O Comment Column to display the following window. Input the desired
name and click the OK Button.
5. Click the General Tab.
6. Click the Download Button, and then click the Reset Button to reset the
Unit.
7. Click the OK Button.
Section 2-3
21