Omron SmartSlice GRT1 Series Operation Manual page 142

Analog Output Units
Setting Tool Procedure (Example: DeviceNet Configurator)
1,2,3... 1. In the Network Configuration Window of the Slice I/O Terminal, double-
click the icon of the Slice I/O Terminal that is to be set. Alternatively, right-
click the icon and select Parameters - Edit. The Edit Device Parameters
Window will be displayed.
2. Click the I/O Module Tab.
3. Click the Edit Button in the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
4. Select the tab page for the output where scaling is to be performed, and
select the Scaling Check Option in the Function Choice Area.
Section 5-5
123