Omron SmartSlice GRT1 Series Operation Manual page 104

Analog Input Units
Setting Tool Procedure (Example: DeviceNet Configurator)
1,2,3... 1. In the Network Configuration Window of the Slice I/O Terminal, double-
click the icon of the Slice I/O Terminal that is to be set. Alternatively, right-
click the icon and select Parameters - Edit. The Edit Device Parameters
Window will be displayed.
2. Click the I/O Module Tab.
3. Click the Edit Button in the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
Section 5-4
85