Avaya S8500 Upgrading Software And Firmware page 51

2
Fill in the fields as described in
Table 3: Firmware Download fields and descriptions 1 of 2
Field
Source Board's
Location
Firmware Image File
Name
Target Board Code
Suffix
Firmware Vintage
Schedule Download
Upgrading Software and Firmware—S8500 Configuration
December 2003
Upgrading firmware on programmable circuit packs
Firmware Download fields and descriptions
Description
Type the UUCSS address of the
source circuit pack.
Type the complete filename of
the new firmware image file. If
the
list directory board
command showed that the file
had an extension, such as.bin,
include the extension as well.
Type the circuit pack ID, for
example "TN2501."
Do not type the suffix, such as
"AP", "DP", or "GP".
Examples:
•
For VAL (TN2501AP),
type AP.
•
For C-LAN
(TN799DP), type DP.
•
For DS1 (TN464GP),
type GP.
This is blank. It shows a value
in the Firmware Download
form of a display firmware
or a
download status firmware
.
download
Type to schedule the
y
firmware download for another
time.
Type n to start the firmware
download immediately after
completing the form.
on page 51.
Notes
For a self download, the same board
is the source board and target board.
For a C-LAN-distributed download,
this is the source C-LAN location.
Enter the TN code of the target
circuit pack(s).
For a self download, this is the same
as for the source circuit pack.
Once the firmware download begins,
you cannot make any changes to this
form. You can only disable this
schedule using
disable firmware
download and then start a new one.
(See Aborting a firmware download
on page 56 for instructions.)
If you answer n(o), then the
and
Date/Time Stop Date/Time
fields disappear. The download
begins as soon as you press Enter.
Start
51