Set Up Loggernet - Campbell CELL200 Series Product Manual

4.1.3 Set up LoggerNet

The LoggerNet Network Map is configured from the LoggerNet Setup screen.
NOTE:
Setup has two options, EZ (simplified) and Standard. Click on the View menu at the top of
the Setup screen, and select Standard view.
From the LoggerNet toolbar, click Main > Setup and configure the Network Map as described in
the following steps:
1. Select Add Root > IPPort.
2. Select PakBusPort and pbRouter for PakBus data loggers such as the CR800 or CR1000.
NOTE:
PakBus data loggers include the following models: GRANITE-series, CR6, CR3000,
CR1000X, CR800-series, CR300-series, CR1000, and CR200(X)-series.
3. Add a data logger to the pbRouter.
4. From the Entire Network, on the left side, select the IPPort. Enter the Konect PakBus Router
DNS address and port number as noted in the Konect PakBus Router setup
PakBus Router
with a colon separating DNS and Port. For example, axanar.konectgds.com:pppp where
pppp is the port number.
(p. 5)). Enter them into the Internet IP Address field in the format DNS:Port
CELL200-Series 4G LTE Cellular Module
(Set up Konect
12