Room/Baby Monitor - Uniden DCT 7488 SERIES Owner's Manual

Room/Baby Monitor

This feature allows you to monitor sounds in
another room. Place a handset or the base in
the room you wish to monitor; it will
function as a microphone. A second handset
can be set to function as a remote speaker,
allowing you to monitor sounds in the room.
Using Room/Baby Monitor
1) Press menu/clear and enter the Room
Monitor menu.
Lis ten to ;
2) Select the handset or the base you want to
monitor by using
3) Press select/ /audio tone.
appears, and you hear sounds in the
Roo mMo nito r
room where the handset or the base is installed.
4) To turn off the Room Monitor, press end or return the handset to the cradle.
w w w . u n i d e n . c o m
appears.
/vol/ /vol/ .
or
M U L T I - H A N D S E T F E A T U R E S [ 7 6 ]
note
•This feature only works
when both handsets
are within the range of
the base.
•If the party is out of
Una vai lab le
range,
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in Room/
Baby Monitor mode,
they cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.