Uniden DCT 7488 SERIES Owner's Manual page 60

[ 5 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
2) Press /volume up/down to select a Ring Time (Toll Saver, 2 Times, 4 Times, or
6 Times).
3) Press select/ /audio tone (or the OK soft key on the base). You will hear a
confirmation tone.
Setting the Record Time
Record Time sets the duration for recording the incoming messages. You have three
record time options: "one minute" "four minutes" or "Announce Only". "Announce
only" answers the call but prevents the caller from leaving a message.
1) Press menu/clear (or the MENU soft key on the base).
Select the Answ. Setup menu, and then the Record Time
submenu.
2) Press /volume up/down to select Record Time (1
Minute, 4 Minutes, or Announce Only).
3) Press select/ /audio tone (or the OK soft key on the base). You will hear a
confirmation tone.
Setting the Message Alert On or Off
Message Alert sounds an alert tone when you have an unheard message. If you set
Message Alert on, whenever a new message is received, the soft alert tone will
sound every 15 seconds. When all messages have been played back, the alert tone
automatically deactivates.
w w w . u n i d e n . c o m