Uniden DCT 7488 SERIES Owner's Manual page 28

[ 2 7 ] G E T T I N G S T A R T E D
Setting the Area Code
If you enter a 3-digit area code number in the "Area Code" option, your local area
code does not appear in the Caller ID message. When calls are received from outside
your local area code, you will see a full 10-digit number.
1) Press menu/clear (or the MENU soft key on the base).
Select the Global Setup menu, and then the Area Code
submenu.
2) Use the number keypad (0-9) to enter a 3-digit area
code. If an area code has already been stored, it will
appear in the display. Press menu/clear (or the DELETE soft key on the base) to
delete the stored code, then enter a new one.
3) Press select/ /audio tone (or the OK soft key on the base). You will hear a
confirmation tone.
w w w . u n i d e n . c o m