Room/Baby Monitor - Uniden TRU8888 Series Owner's Manual

Room/Baby Monitor

note
•This feature only works
when the handset(s) is
within the range of the
base.
•If the party is out of
range,
Unavailable
appears in the display,
and the operation will
be canceled.
[ 7 1 ] M U L T I - H A N D S E T F E A T U R E S
This feature allows you to monitor
sounds in another room. Place the base
or a handset in the room you wish to
monitor; it will function as a
microphone. A second handset can be
set to function as a remote speaker,
allowing you to monitor sounds in the
room.
Using Room/Baby Monitor
1) Press the MENU soft key and select
Room Monitor menu.
2) Select the handset or base you want
to monitor by using volume up/down.
3) Press the OK soft key.
You hear sounds in the room where the handset or the
base is installed.
4) To turn off the Room Monitor, press the END soft key,
or end.
If you want to prevent other handsets or the base from monitoring this handset,
press the MENU soft key. Select the Handset Setup menu, and then the Room
Monitor submenu. Select and press the OK soft key.
Of f
Monitor using
handset or
base unit
w w w . u n i d e n . c o m