Direct Wall Mounting - Uniden DCT 7488 SERIES Owner's Manual

[ 1 5 ] G E T T I N G S T A R T E D

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices suitable for
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall
(with their appropriate anchors) 3 & 15/16
inches apart. Allow about 1/8 of an inch
between the wall and screw heads for
mounting the phone.
2) Refer to steps 1 through 10 on page 14 to
mount the telephone.
w w w . u n i d e n . c o m