Uniden DCT 7488 SERIES Owner's Manual page 23

Distinctive Ringer Setup
Distinctive Ringer allows you to assign a designated ring tone to a stored
phonebook number. When a call is received and the Caller ID information matches
the information in one of the phonebook memory entries, the phone uses the
distinctive ring assigned to that particular caller. You can assign distinctive rings
to multiple phonebook memory entries. Switching the setting to Distinctive Off
disables distinctive ringing: all incoming calls will have a normal ring tone.
Switching to Distinctive On activates all programmed distinctive rings.
1) Press menu/clear (or the MENU soft key on the
base). Select the Handset Setup or Base Setup menu,
and then the Distinctive Ring submenu.
2) Press /volume up/down to select
3) Press select/ /audio tone (or the OK soft key on the base). You will hear a
confirmation tone.
Setting AutoTalk (Handset only)
AutoTalk allows you to answer the phone simply by removing the handset from the
cradle. You do not have to press any buttons to answer the call.
1) Press menu/clear. Select the Handset Setup menu,
and then the AutoTalk submenu.
2) Press /vol/
or
3) Press select/ /audio tone. You will hear a
confirmation tone.
w w w . u n i d e n . c o m
or
On O ff
/vol/ to select or
On Off
.
.
G E T T I N G S T A R T E D [ 2 2 ]