Storing A Redial Record - Uniden DCT 7488 SERIES Owner's Manual

9) Press select/ /audio tone (or the OK soft key). You
will hear a confirmation tone, and
the display.
Storing Caller ID Messages in the Phonebook
Messages shown in the Caller ID list (see page 52) can be stored in the phonebook.
The phone number and name of the party on the Caller ID list can be stored in
memory.
1) When the phone is in standby mode, select the Caller ID message to be stored.
2) Press select/ /audio tone (or the STORE soft key).
If the Caller ID message is already stored in memory, you will hear three beeps
and
Thi s d ata is al rea dy sto red! !
3) To complete the setting, follow the steps 4-9 in "Storing and Editing Phone
Numbers, Names, Distinctive Rings and Speed Dial" on page 42.

Storing a Redial Record

1)With the phone in standby mode, press pause/redial.
2) Press pause/redial repeatedly to display the number to be stored.
3) Press select/ /audio tone (or the STORE soft key).
If the number is already stored in memory, you will hear three beeps and
dat a i s al rea dy sto red !!
4) To complete the setting, follow the steps 4-9 in "Storing and Editing Phone
Numbers, Names, Distinctive Rings and Speed Dial" on page 42.
w w w . u n i d e n . c o m
appears in
Do ne!
appears. The number will not be stored.
appears. The number will not be stored.
appears.
S tore /Ed it Nam e
appears.
S tore /Ed it Nam e
Th is
note
•If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
•If the Caller ID
message was received
as a private/unknown
number or the message
does not have the
number, you cannot
store the message in
the phonebook. If it
was received as
private/unknown
name, the message will
be stored as <No
Name>.
•Even if all 100 memory
locations are full, the
message will be stored
in the phonebook.
However, the oldest
Caller ID message will
be erased from the
Caller ID list.
P H O N E B O O K [ 4 4 ]