Uniden DCT 7488 SERIES Owner's Manual page 13

C. Install the rechargeable battery pack into the handset
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into
the jack inside the battery compartment. (The connector
notches fit into the grooves of the jack only one way.)
Match the wire colors to the polarity label in the battery
compartment, connect the battery and listen for a click to
insure connection.
3) Make sure you have a good connection by slightly pulling
on the battery wires. If the connection is secure, the
battery jack will remain in place.
4) Place the battery case cover back on the handset and
slide it upwards until it clicks into place.
w w w . u n i d e n . c o m
note
Use only the Uniden
(BT-446) rechargeable
battery pack supplied
with your cordless
telephone.
G E T T I N G S T A R T E D [ 1 2 ]