Call Transfer Feature - Uniden DCT 7488 SERIES Owner's Manual

From a handset
1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will
automatically answer when you pick it up.)
2) Press talk/flash, or hold/transfer/int'com.
From the base
Pick up the corded base handset. To answer with the base speakerphone, press
transfer/int'com/hold,
To hang up an intercom page from:
-- Handset: press end or return the handset to the cradle.
-- Base: press the END soft key or return the corded handset to the base.

Call Transfer Feature

The call transfer feature allows you to transfer a call between the base and a
handset or between two handsets.
From a handset
1) During a call, press hold/transfer/int'com on the handset. The Call will be put
on hold.
2) Use volume up/down to select the base or the
handset you want to transfer the call to, and then
press select/ /audio tone. If you select
other handsets and the base will be paged.
The call will automatically be placed on hold, and
paging tone sounds.
To cancel the transfer, press talk/flash or
w w w . u n i d e n . c o m
, or the ANSWER soft key.
, all
Al l
on the initiating handset.
M U L T I - H A N D S E T F E A T U R E S [ 7 4 ]