Using The Room/Baby Monitor - Uniden UIP 160P Series Owner's Manual

note
This feature only
works when the
handset(s) is within
the range of the base.
[ 5 3 ] M U L T I - H A N D S E T F E A T U R E S

Using the Room/Baby Monitor

This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset can be
set to function as a remote speaker,
allowing you to monitor sounds in the
room.
1) Press the MENU soft key and select
the Room Monitor menu.
2) Select the handset you want to
monitor by using cid/vol/
∨
redial/p/vol/ .
3) Press the OK soft key.
appears, and you hear sounds in the room
M o ni to r in g
where the handset is installed.
4) To turn off the Room Monitor, press the END soft key,
or end.
If you want to prevent other handsets from monitoring this one, press the MENU
soft key. Select the Handset Setup menu, and then the Room Monitor submenu.
Select and press the OK soft key.
O ff
∧
or
w w w . u n i d e n . c o m