Remote Access With The Handset - Uniden DCT 7488 SERIES Owner's Manual

Remote access with the handset

You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press select/
Rem ote ope rat ion pr ess [0 -8]
system announces the current time and the number of messages stored in the
memory.
2) You hear the announcement, "For help, press zero."
- To record a memo press 7.
- To record a personal greeting message, press 8.
3) If you have no messages, the answering machine will enter command waiting
mode.
If you have any incoming messages the answering system starts playing the
message. The total number of messages and the message number appears. The
time and day that each message was received is announced after the message is
played.
/1
Repeat a Message
/3 Skip a Message
To stop the operation and proceed to another command, press 5,
or press end to exit the system.
4) Enter a command within 30 seconds.
While playing a message, enter a command from the following chart:
w w w . u n i d e n . c o m
/audio tone on the handset.
appears on the handset display. The answering
/4 Delete a Message
/5 Stop Operation.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 6 8 ]
note
•For the Repeat a
Message function,
press /1 within
about four seconds to
repeat the previous
message, or press
/1 after about four
seconds to repeat the
current message.
•Messages will be
played in the order in
which they were
received. The time and
day that each message
was received is
announced after the
message is played.
•The greeting must be
more than two seconds
long and less than 30
seconds.