Call Waiting; Placing A Call On Hold - Uniden DCT 7488 SERIES Owner's Manual

Call Waiting

note
•You must subscribe
through your local
telephone company to
receive Call Waiting or
Caller ID on call
waiting service.

Placing a Call on Hold

•You can place a call on
hold for five minutes.
When five minutes has
passed, the call is
disconnected, and the
phone returns to
standby mode.
•While a call is on hold,
CIDCW can not be
received.
[ 3 3 ] B A S I C S
If you have Call Waiting service and a call waiting
tone sounds while you are on a call, press talk/flash
on the handset or the FLASH soft key on the base to
accept the waiting call. There is a short pause, and
then you will hear the new caller. To return to the
original caller, press talk/flash on the handset or the
FLASH soft key on the base again.
1) During a call, press hold/transfer/int'com on the
handset or base. The call will be put on hold.
If you leave a call on hold for more than ten seconds,
the display screen will read,
2) To return to the call, pick up the corded handset or press talk/flash on a
handset. To talk to the caller on a speakerphone, press
handset.
Li ne On Hol d .
on the base or on a
w w w . u n i d e n . c o m