Uniden DCT 7488 SERIES Owner's Manual page 76

[ 7 5 ] M U L T I - H A N D S E T F E A T U R E S
From the base
1) During a call, press transfer/int'com/hold on the base.
The Call will be put on hold.
2) Use volume up/down to select the handset you want to transfer the call to,
and then press the OK soft key. If you select
paging tone sounds. To cancel the transfer, press transfer/int'com/hold,
the CANCEL soft key on the base.
Answering a Call Transfer Page
When the page tone sounds, the display will show the ID of the handset or base
that is transferring the call.
To answer a page from a handset
1) Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will
automatically answer when you pick it up. Or If Any Key Answer is enabled,
pressing a number key,
2) Press talk/flash, or hold/transfer/int'com.
To answer a page from the base
Pick up the corded base handset. To answer with the base speakerphone, press
transfer/int'com/hold,
Accepting the call transfer
After answering the page, if you want to accept the call and speak to the outside
caller, press talk/flash on the receiving handset or
/tone/ , or #/ will answer the page.)
*
, or the ANSWER soft key.
, all handsets will be paged. A
Al l
on the base.
w w w . u n i d e n . c o m
or