Remote Access With The Handset - Uniden WDECT3355 Owner's Manual

• When you receive
a call, the remote
operation is canceled.
• When another handset
or base make a call,
the remote operation
is cancelled.
• During the remote
operation "–" appears
on the base.
• If you have new
messages and old
messages, only the
new messages will
be played. After you
have reviewed your
new messages, you
can play your old
messages by again
pressing 2.
[ 53 ]
* To repeat a message, press # then 1 within about four seconds to repeat the
previous message, or press # then 1 after about four seconds to repeat the cur-
rent message.
** For the Memo Record and Greeting Message Record functions, the first time
you enter the corresponding command, it starts the Recording function. If you
want to stop the recording, enter the command again.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at
this time from the chart above.
6) When you are finished, hang up to exit the system. The answering system auto-
matically returns to standby.

remote access with the handset

You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press
Answering Machine operation appears on the handset display. The answering
system announces the current time and the number of messages stored in the
memory.
Messages will be played in the order in which they were received. The time and
day that each message was received is announced after the message is played.
2) You hear "To play incoming messages, press two. For help, press zero."
You will hear a beep.
3) Enter a command within 30 seconds. You may select a command from the
following chart:
on the handset. Remote