SATO CT4-ex-RF Operator's Manual page 8

■ Do not use other than the
specified voltage.
• Do not use other than the specified
voltage. Doing so could result in fire or
electric shock.
■ Do not put objects inside the printer.
• Do not insert or drop in metal or burnable
objects inside the printer 's openings
(cable outlets, etc.). If foreign objects do
get inside the printer, immediately turn off
the power switch, unplug the power cord
from the outlet, and contact your SATO
reseller or technical support center. Using
the printer in this condition could cause a
fire or electric shock.
■ Handling the power cord
• Do not damage, break, or modify the power
cord. Also, do not place heavy objects on
the power cord, heat it, or pull it because
doing so could damage the power cord and
cause a fire or electric shock.
• If the power cord becomes damaged (core is
exposed, wires broken, etc.), contact your
SATO reseller or technical support center.
Using the power cord in this condition could
cause a fire or electric shock.
• Do not modify, excessively bend, twist, or
pull the power cord. Using the power cord in
such a condition could cause a fire or
electric shock.
■ When the printer has been
dropped or broken
• If the printer is dropped or broken,
immediately turn off the power switch,
unplug the power cord from the outlet, and
contact your SATO reseller or technical
support center. Using the printer in this
condition could cause a fire or electric shock.
■ Do not use in hazardous locations
• The printer is not explosion proof certified.
• Do not use in a potentially explosive
environment or atmosphere.
■ Do not set on an unstable area
• Do not set on an unstable area, such as a
wobbly table or slanted area or an area
subject to strong vibration. If the printer falls
off or topples over, it could injure someone.
■ Do not place containers full of
water or other liquid on the printer
• Do not place flower vases, cups, or other
containers holding liquids, such as water or
chemicals, or small metal objects near the
printer. If they are spilled and get inside the
printer, immediately turn off the power switch,
unplug the power cord from the outlet, and
contact your SATO reseller or technical
support center. Using the printer in this
condition could cause a fire or electric shock.
■ AC Adapter
• Use only the specified AC adapter. Using a
different one may create the danger of fire
or electric shock.
6
WARNING
■ Do not use the printer when
• Continuing to use the printer in the event
■ Print head
• The print head is hot after printing. Be
• Touching the edge of the print head with
• The customer should not replace the print
■ Handling the AC Adapter
• Do not damage, break, or change the AC
• If the AC adapter is damaged (the wires
■ Do not disassemble the printer
• Do not disassemble or modify the printer.
■ Do not operate with wet hands
• Do not operate the power switch or
■ Regarding the cutter
• Do not touch the cutter with your hands
■ Using the head cleaning fluid
• Use of flame or heat around the head
• Keep the fluid out of reach of children to
something is abnormal ab
out it
something is abnormal about it, such as
smoke or unusual smells coming from it,
could result in fire or electric shock.
Immediately turn off the power switch,
unplug the power cord from the outlet,
a n d c o n t a c t y o u r S ATO r e s e l l e r o r
technical support center for repairs. It is
dangerous for the customer to try to
repair it, so absolutely do not attempt
repairs on your own.
careful not to get burned when replacing
media or cleaning immediately after printing.
bare hands could result in injury. Be careful
not to become injured when replacing media
or cleaning.
head. Doing so could result in injury, burns
or electric shock.
adapter. If you place a heavy object on
the AC adapter or heat, bend too much,
twist, or pull the AC adapter, the AC
adapter may be damaged, which may
cause fire or electric shock.
exposed or broken), contact your SATO
reseller or technical support center. If you
operate the printer in this condition, it
may cause fire or electric shock.
Doing so could result in fire or electric
s h o c k . A s k y o u r S AT O r e s e l l e r o r
technical support center to conduct
internal inspections, adjustments, and
repairs.
unplug the power cord or cable with wet
hands. Doing so increases the risk of
electric shock.
or do not put something into the cutter.
Doing so could result in an injury.
cleaning fluid is prohibited. Absolutely do
not heat it or subject it to flames.
prevent them from accidentally drinking
it. If a child accidentally drinks the fluid,
immediately consult with a physician.