SATO CT4-ex-RF Operator's Manual page 28

Fine-tuning the Print Position and Stop Position of the Label
Fine-tuning the Print Position
If the standard print position is not adequate, fine-tune it with the "Print position
potentiometer" inside the front cover. Use the cross slot side of the attached
tuning driver alongside the media holder.
Counterclockwise: Print position moves in the same direction that the media flows
Clockwise:
Tuning driver
Print position
potentiometer
(VR2)
* Tuner on the right
Label Stop Position and Label Cutting Position
■
For the model with cutter
The proper cutting position for the labels is
the space between labels.
Do not set it to cut a label itself to avoid
making the cutter blade dull by adhesive of
the label.
26
(apart from the printer).
Print position moves in the opposite direction from that in
which the media flows (approaching the printer).
Cutting position
Liner