SATO CT4-ex-RF Operator's Manual page 52

Size of Ribbon/
Form of Ribbon/
Winding Direction of
Ribbon
Dispensing Mode
Size/ Weight
Power Supply
Environmental
Conditions
(Temperature/
Humidity)
Interface
Option
Operating buttons
Level Adjustments
Media Length
Detecting Sensors
50
Ribbon Length: 100 m (328 ft.) winding maximum
Ribbon width: 111 mm (4.4ˮ) maximum
Winding Direction: Face-out
Type of Winding: Winding with Core
Continuous, Cutter, Partial Cut
Width 198 mm (7.8ˮ) × Depth 247 (9.7ˮ) mm × Height 181 mm
(7.1ˮ) /Approximately 3.2 kg (7.1 lb) (Except AC adapter)
Power requirements (AC adapter)
 Input voltage: AC 100 - 240 V ±10 %, 50 - 60 Hz
 Output: DC 25 V, 2.1 A
Power consumption
Input power voltage condition: AC 100 V, 50 Hz
At peak:
Standby:
Operating Temperature
Humidity
Storage Temperature
Humidity
* Conditions above may differ depending on the media or ribbon.
USB, LAN, RS-232C
 SD card
 Simple Input Device Key-Bo
Button: ON LINE, FEED
Indicator: POWER, ON LINE, ERROR, ERROR status LED
 Media sensor adjustment
 Print position adjustment
 Print darkness adjustment
 Cutter stop position adjustment
* DSW6 switches between Print darkness adjustment and Cutter stop
position adjustment.
 I-mark sensor (Reflective type)
 Gap sensor (Transmissive type)
120 VA / 70 W (at 30 % printing ratio)
13 VA / 6 W
5 to 35 ºC (41 to 95 ºF)
30 to 80 %RH (Non-condensing)
‒5 to 60 ºC (23 to 140 ºF)
30 to 90 %RH (Non-condensing)