4
While holding the media
guide slide lever pressed,
adjust the width of the
media holder to fit to the size
of the media.
Draw in the media and pass it
through the media sensor
and under the tab.
5
Close the top cover.
Press the points on the top,
as shown by the arrows, until
the top cover closes with a
click.
6
Power on the printer.
Press the
to change to Offline mode.
Press the
adjust the top position of
the media.
Press the
again to change to Online
mode.
Setup of the fan-fold media is complete.
button
ON LINE
button to
FEED
button
ON LINE
②
Media sensor
②
④
③
①
①
Tab
25