SATO CT4-ex-RF Operator's Manual page 24

Loading Media Roll
When you use the fan-fold media, see the explanations on page 24.
CAUTION
• The print head and its surroundings are hot after printing. Be careful not to get
burned when replacing the media immediately after printing.
• Touching the edge of the print head with your bare hand could cause injury.
• When closing the top cover, be careful not to pinch your fingers.
• Be careful not to touch the upper blade of the cutter to avoid being hurt.
1
 Press the Cover open/
close latch downward to
release the lock, and  open
the top cover.
2
 While holding the media
guide slide lever pressed,
 adjust the width of the
media holder.
3
Load the media in the media
holder.
22
②
①
Cover
open/close
latch
②
①
Media guide slide lever