Carbon Ribbon of over 92 mm (3.6 inches) Wide
3
Set the carbon ribbon
from the right side of the
ribbon supply spindle (in the
back), and push the core
guide to lock.
4
Set the ribbon core from
the right side of the ribbon
rewinder (in the front), and
push the core guide to lock.
5
Pass the carbon ribbon from
the ribbon supply spindle (in
the back) under the print
head to reach the ribbon
rewinder (in the front).
Be sure to pass the carbon ribbon between
the print head and the label stopper. Do not
pass it under the label stopper.
6
Attach the carbon ribbon to
the ribbon core with adhesive
tape or the like, and wind
them in the direction of the
arrow a few rounds.
Proceed to step 12.
(
Page 19)
②
①
Core guide of the ribbon
supply spindle
②
①
Core guide of the ribbon
rewind spindle
Label stopper
③
③
17