Table of Contents
Advertisement
Glossary
Automatic Serial Polling A feature of the NI-488.2M software in which
(Autopolling)
B
Board Function
C
CIC
config.sys
Controller-In-Charge
(CIC)
D
DAV (Data Valid)
DCL
Declaration File
Device Clear
NI-488.2M SRM for OS/2
serial polls are executed automatically by the
driver whenever a device asserts the GPIB SRQ
line.
A function that operates on or otherwise pertains
to one of the GPIB interface boards in the
computer.
See Controller-In-Charge.
An OS/2 file that contains the names of the
loadable device driver or driver programs that
OS/2 loads when it is started up.
The device that manages the GPIB by sending
interface messages to other devices.
One of the three GPIB handshake lines. See
Handshake.
Device Clear is the GPIB command used to reset
the device or internal functions of all devices.
See SDC.
A file containing definitions that must be placed
at the beginning of an application program.
decl.h is the declaration file for C programs
using the NI-488 functions and NI-488.2
routines. See Language Interface.
See DCL.
G-2
© National Instruments Corp.
Advertisement
Table of Contents
