ibic—Interface Bus Interactive Control Utility
With ibdev, you can input the values in the following fields:
•
Access Board for the Device
•
Primary Address
•
Secondary Address
•
Timeout Setting
•
EOT mode
•
EOS mode
The following example shows ibdev opening an available device and
assigning it to access gpib0 (board = 0) with a primary address of 6 (pad =
6), a secondary address of hex 67 (sad = 0x67), a timeout of 10 ms (tmo = 7),
the END message enabled (eot = 1), and the EOS mode disabled (eos = 0).
: ibdev 0 6 0x67 7 1 0
id = 32259
ud0:
NI-488.2M SRM for OS/2
5-14
© National Instruments Corp.
Chapter 5