Table of Contents
Advertisement
Error Codes and Solutions
ETAB (20)
ETAB occurs only during the FindLstn and FindRQS routines. ETAB
indicates that there was some problem with a table used by these functions.
•
In the case of FindLstn, ETAB means that the given table did not
have enough room to hold all the addresses of the Listeners found.
•
In the case of FindRQS, ETAB means that none of the devices in the
given table were requesting service.
Solutions
1.
Increase the size of result arrays for FindLstn and FindRQS.
NI-488.2M SRM for OS/2
B-10
© National Instruments Corp.
Appendix B
Advertisement
Table of Contents
