Table of Contents
Advertisement
ibic—Interface Bus Interactive Control Utility
11.
list is a comma-separated list of address integers, optionally enclosed
in parentheses. An empty list can be expressed by empty parentheses.
12.
mode is a termination mode mnemonic or integer. Mnemonics are
NLend, DABend, and NULLend for send operations, and STOPend for
receive operations.
13.
address is an integer representing a GPIB address. If only a primary
GPIB address is required, enter that integer. If a secondary address is
also required, create an integer with the primary address in the low-order
byte, and the secondary address in the high-order byte; for example,
pad 3 and sad 0x61 could be expressed as 0x6103.
14.
line and sense are integers representing the data line to respond on
and the sense of the response.
15.
mn is a mnemonic for a configuration parameter or the equivalent integer
value. Refer to the description of ibconfig in the NI-488.2M Function
Reference Manual for OS/2 for the allowed mnemonics and their values.
16.
mna is a mnemonic for a configuration parameter or the equivalent
integer value. Refer to the description of ibask in the NI-488.2M
Function Reference Manual for OS/2 for the allowed mnemonics and
their values.
NI-488.2M SRM for OS/2
5-8
© National Instruments Corp.
Chapter 5
Advertisement
Table of Contents
