Table of Contents
Advertisement
Chapter 7
Description Level
The description-level screens of ibconf display current values, such
as addressing and timeout information, for device or board settings. See Figure
7-3.
You can access the description-level screens from the map level of ibconf by
selecting a board or device and pressing <F8>. You can use the <Up>, <Down>,
<PageUp>, and <PageDown> cursor keys to select a characteristic. For your
convenience, cursor control keys and function keys are defined at the bottom of
your computer screen.
Selecting the configuration settings for each device and board customizes the
communications and other options to be used with that board or device. These
settings are the characteristics used by the access board when device functions
are used to program the device or when board functions are used to program the
board.
The following options are available at the description level:
•
Change Characteristics
•
Next Board/Device
© National Instruments Corp.
ibconf—Interface Bus Configuration Utility
Figure 7-3. Description Level of ibconf
7-7
NI-488.2M SRM for OS/2
Advertisement
Table of Contents
