Table of Contents
Advertisement
ibconf—Interface Bus Configuration Utility
•
Help
•
Reset Value
•
Return to Map
The following sections describe the options available in the description level of
ibconf.
Change Characteristics
To change a specific characteristic of a device or a board, first move your cursor
to the characteristic. If the double arrow symbol appears to the left of the input
field, use the left/right arrow keys to select between different options. If a
blinking cursor appears in the field, input the new value directly from the
keyboard. Instructions on the right half of the screen inform you about the
options for the characteristic.
Next Board/Device
If you are viewing the characteristics of a board, use <Ctrl-PageUp> and <Ctrl-
PageDown> to move to the characteristics screen for the previous or next board.
If you are viewing the characteristics of a device, use <Ctrl-PageUp> and <Ctrl-
PageDown> to move to the characteristics screen for the previous or next device.
Help
Use <F1> to access the comprehensive, online help feature of ibconf. The
help information describes the functions and common terms associated with the
description level of ibconf.
Reset Value
Use <F6> to reset the current characteristic to the value it contained when it was
last modified.
Return to Map
Use <F9> or <Esc> at the description level to return to the map level of
ibconf.
NI-488.2M SRM for OS/2
7-8
© National Instruments Corp.
Chapter 7
Advertisement
Table of Contents
