National Instruments NI-488.2M Software Reference Manual page 107

ibic—Interface Bus Interactive Control Utility
9. Read the status byte. The status byte returned may vary, depending on the
device used.
gpib0:
[0164] (cmpl rem cic lacs)
count: 1
50
10. Complete the serial poll by sending the serial poll disable message (SPD).
The hex value 19 represents the serial poll disable function.
gpib0:
[0174] (cmpl rem cic atn lacs)
count: 1
11. Read the measurement. The DVM and the computer are still addressed to
talk and to listen.
gpib0:
[2164] (end cmpl rem cic lacs)
count: 20
0d 0a 4e 44 43 56 2d 30
30 30 2e 30 30 34 37 45
2b 30 0d 0a
NI-488.2M SRM for OS/2
ibrd 1
P
ibcmd "\x19"
ibrd 20
5-34
• • N D C V - 0
0 0 . 0 0 4 7 E
+ 0 • •
© National Instruments Corp.
Chapter 5