National Instruments NI-488.2M Software Reference Manual page 13

italic monospace
<>
<Enter>
-
enter
IEEE 488 and
IEEE 488.2
NI-488.2M software
Abbreviations, acronyms, metric prefixes, mnemonics, symbols, and terms are
listed in the Glossary.
© National Instruments Corp.
Italic lowercase text in this font denotes that you must
supply the appropriate words or values in the place of
these items.
Angle brackets enclose the name of a key on the
keyboard—for example, <PageDown>.
Key names are capitalized.
A hyphen between two or more key names enclosed
in angle brackets denotes that you should
simultaneously press the named keys—for example,
<Control-C>.
Enter is reserved to mean that the commands
immediately succeeding the word must be typed into
the computer and then executed by pressing the
<Return> key on the keyboard.
IEEE 488 and IEEE 488.2 refer to the
ANSI/IEEE Standard 488.1-1987 and the
ANSI/IEEE Standard 488.2-1987, respectively,
which define the GPIB.
NI-488.2M software refers to the NI-488.2M software
for OS/2 unless otherwise noted.
xiii
About This Manual
NI-488.2M SRM for OS/2